DirtFighter
Comments
-
100% shares for the last 13 hours on Scrypt-N…nice job!!:)
-
Awesome…I had 5 of 5 shares this afternoon on x11 whenI got up. I switched over to Scrypt n and I am at 5 0f 5 in about 5 minutes…that is 100% improvement. Usually I would start SN with 0 of 1 and would stay at 65- 70% right out of the gate..ha ha 7…
-
I switched back to x11 and took a shower..when I got out of the shower it had 1 accepted share…I guess it just takes a little while
-
ok …so I got up after a couple hours and checked it…showed it was hashing but I had no accepted shares so I still had 0 for a hash rate. I switched back to Scr-n and it performs the same as the old version..about 67% accepted. The good news is , it …
-
BTW…I went to "GO" and put in :/Users/username/Library/Application Support/MacMiner just to see what is what…"The folder could not be found"
-
ok …IM going to bed…I will report what happen over the next 8 hours or so when I get up….Thanks again
-
Cool…Thank you John…I have the fans going about half speed running about 124F…51C
-
crashes with no pass
-
no ..I did not delete the files but I put x for the pass. I will try it with no pas and see what happens.Can I run the GPU on Scrypt n at the same time CPU on X11?
-
no shares yet…but I will let it run all day while I'm asleep and before I go to work tonight I will update you with progress
-
Sweet…looks like I am hashing on X-11..about 110KHs
-
man …it won't even open with out crashing now…I think I have it set to start on CPU as soon as I start Macminer…bare with me and I will delete and download again
-
Sure ..give me a minute.I just walked in the door from work…16 hours today ,,Im beat
-
I left it blank
-
OK…I updated to the newest version and it crashed on mestratum+tcp://uswest.wafflepool.com:3331 is what I have for the poolUsername is BTC address any passwordThe report is to long …do I need to download the latest version or is there a patchsweet…I see you got the forum going again too. I am going to try it outIt does not show in the screen shot but I also get stratum_recv_line failed...Stratum connection interrupted..Stratum connection interruptedIt might be the pool too…I am on Wafflepool and I believe the difficulty is locked at 512…I might be to small and the % might be depending on the particular coin being mined at the time. Maybe why it fluctuates.Just a guessWooo Whooo the forum is back…thanksI am on version 1.5.20b3 here is a screen shot of the version and my accepted shares on the miner http://prntscr.com/3whydp This…Thought I might share..I have been CPU mining Scrypt-n on Waffle-Pool. Currently at 69.71%accepted shares (last 12-15 hours) it has been as low as 45% before.Reading all that technical stuff you guys wrote is like reading chin…Awesome…Thanks for all you do for us Mac heads…BTW I sent you an email about the lateset version of MacMiner not working for me..just wondering if it was of any use to you ?…using the previous version with no problems except with Scrypt -N I get a …THANKS !!!! for the heads up on minersource.net those are the best prices I have seen so far on grid seed and the S1 180GHs ...now to do the calculations and see what will be more profitable.If KNC took credit cards I would pr…I guess the mobile version is in my Mac since all the components are in the monitor makes sense that that big card would not be in this set up…oh well…I set it to 11 dynamic intensity was already unchecked…not getting more than 7 KHs…So ends the min…Hi John…seems to be working good now..I have not been able to post at all for the last 3 days…Thanks for the upgrade. I was getting no user ID and was getting booted off having to log in over and over. Every time i tried to post I would get booted….…I cleared up the DirtFighter and LTC address thing ..( I hope)..I have the GPU set to 11 as suggested…currently getting 6.4 KHs.I also tried to switch to Dogecoin…I figured I would see success faster with just using the compute…ok…it kicked on but now the GPU is running at .01 Khs. is there any thing I can do to speed it up? I was not getting great performance from it any way but it was hashing around 6KHs beforebump
AMD Radeon HD 6770M:
Chipset Model: AMD Radeon HD 6770M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x6740
<…OK me again…I thought this might help some one answer me if I am successfully mining or not. This is a screen shot of how I set every thing up. I see I am getting "connection timed out" a lot on the GPU side