syncsam
Comments
-
-S zus:all doesn't work so you will have to use the -S for each device. device 2 should be something like -S zus:/dev/cu.SLAB_USBtoUART2
-
I had a play, I found you have to manually put the -s zus:/dev/cu.SLAB_USBtoUART code in to find your minerNot sure about multiple miners. but ls -l /dev/cu.* should show youor possibly -S zus:all which works on BFgm…I had a play, I found you have to manually put the -s zus:/dev/cu.SLAB_USBtoUART code in to find your minerNot sure about multiple miners. but ls -l /dev/cu.* should show youor possibly -S zus:all based on the bfgmin…sweet as will try that, that might have been my problem, not using capitals. I just used small case on the windows version with no problems so didn't realise it had to be capitalyeah I tried -S zeus:all and zeus:/dev/cu.Slab_USBtoUART but both didn't work. So I went through the si labs documents and forums and other people have had this problem, I don't know if it was mining specific (Def Mac specific), but they were told …hey everyone, is anyone online right now that has all the stuff installed that I previously mentioned, I haven't currently got a mac system setup and will take a few hours, but I think I may have found some info on that might helpdeletedHi, So I have had no luck getting them recognised on a mac (I've done everything I could think of), but the good news is that terry and Customer support seem to be back online, so email cs@zeusminer.com or terry@zeusminer.com and they should be able…I've actually found some instructions to use if you can't find the device on the usb ports, so will try that tomorrow, hopefully that will workand another thing for the guys n girls that have the blizzards is I'm getting between 2900kh/s and 3200kh/s on my 2 blizzards (running on windows, figures from the pool not cgminer) running clock speed of 340, 328 is what zeus initially advised, abo…cool than for the code, I'm actually not a programmer or anything I'm just learning how to use linux now-s /dev/cu.SLAB_USBtoUART is the code, but still says it can't find the minerSomeone put up a …the -s code is required on the windows and linux versions so I take its the same hereyeah I have that driver installed, the cgminer is an old version, so doesn't auto detect will need to use -s, I didn't get onto it tonight, but will get onto it again tomorrow, I think the code will go something like -S zeus:/dev/ttyUSB0 (which is …Alright this is what I didInstalled homebrewIn terminal copy and pasteruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/instal…I think I got it working I am just testing it out now, will get back to you soonsweet az, I'm not to worried as I have a controller arriving in the next couple days, thought I would come and see if I can help here, bit late now so going to bed, but will try your suggestion tomorrow and report backThe problem I had with the mac cgminer is that one of the libraries says it needs a higher version
dyld: Library not loaded: /opt/local/lib/libcurl.4.dylib
Referenced from: /Users/sam/Desktop/ZEUSMINER_cgminer_mac_ox_x86_64
…
Hi are yous still having trouble with setting up your blizzards. I just received mine today and have managed to get it setup on my mac, but based on the windows, I downloaded Virtualbox and setup windows on my mac, then used the instructions based…