Categories
- 1.6K All Categories
- 1.4K General
- 278 FabulousPanda Apps
- 57 Uke Ukulele Tuner
- 38 Unlimited Colouring Art
- 92 De Stijl Art Factory
- 45 Wheres the Unicorn and Meerkat
- 56 XMR Monero and Aeon mining
- 33 Pools
- 55 FPGA and ASIC devices
- 29 cgminer for Mac OS X
- 44 bfgminer for Mac OS X
- 286 Support
- 48 Feature Requests
Buy Monero at local Monero
Trade BTC for Monero at AgoraDesk
Use Anonymous Ads
Use Anonymous Ads
JSON config parse error(offset 1782)
I am getting this error
JSON config parse error(offset 1782): Invalid escape character in string.
ANd i have found it occurs mainly when i use pool settings
xmr-asia1.nanopool.org:14444
Comments
i have got two aorus 1080ti extreme addition on my mack they are giving around 1.8 k hs on default pool but i want to use em for nanopool
coz from last 3 hours moneropool aint showing any progress just hashes so i am skeptical about this pool . will see what it shows after 3 hours but if balance is zero i aint using it
This means there's an error with the 1782nd character in the conf file, did you edit it manually? If so it's usually a curly quote that got in there by autocorrect.
hey a quick thanks first ill check it but i didnt get what do you mean edit it manually , is there some other way of editing it other then textedit
Nope checked it out the error my 1782nd character is coming in my wallet address and therefore it is not an escape character , i just change the mining pool to xmr-asia1.nanopool.org:14444 and it just gives the error
Sorry you didn't say what program you were using and I just assumed MacMiner! I tested xmr-stak-cpu with that pool and it didn't throw an error. Can you post the pool config here as is in your config.txt?
/*
* Number of GPUs that you have in your system. Each GPU will get its own CPU thread.
*/
"gpu_thread_num" : 1,
/*
* GPU configuration. You should play around with intensity and worksize as the fastest settings will vary.
* index - GPU index number usually starts from 0
* intensity - Number of parallel GPU threads (nothing to do with CPU threads)
* worksize - Number of local GPU threads (nothing to do with CPU threads)
* affine_to_cpu - This will affine the thread to a CPU. This can make a GPU miner play along nicer with a CPU miner.
*/
"gpu_threads_conf" : [
{ "index" : 0, "intensity" : 64, "worksize" : 8, "affine_to_cpu" : false },
],
/*
* Platform index. This will be 0 unless you have different OpenCL platform - eg. AMD and Intel.
*/
"platform_index" : 0,
/*
* TLS Settings
* If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
* to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
*
* use_tls - This option will make us connect using Transport Layer Security.
* tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
* tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.
*/
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",
/*
* pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
* wallet_address - Your wallet, or pool login.
* pool_password - Can be empty in most cases or "x".
*/
"pool_address" : “xmr-asia1.nanopool.org:14444”,
THE MOMENT I changed pool address its gives
JSON config parse error(offset 1749): Invalid value.
i am using xmr stack on my hackintosh with 1080ti extreme
it works fine with monero pool but as soon as i add pool address of xmr it gives error.Thanks for reply
i am using cmr stack amd for gpu. as i said it works fine on moneropool but gives error on nanopool setting i mentioned above
You have curly quotes around the pool. Copy paste standard quote marks from elsewhere in the config and be careful about autocorrect or edit in a code editor like Xcode rather than Textedit.
Pretty sure the curly quotes come standard or something. Just resolved my issue with the xmr cpu miner, which was the curly quotes even though I never touched them.
yeah worked with xcode
Is there any other config needed for xmr because just few minutes after my windows machine is reflected on nanopool but not mac one it is just showing new block found
somehow textedit was adding something. NOw my problem is that with nanopool i am not seeing it on the interface of nanopool and i think it is taking double the time to submit result
What hash rate are you getting on the hackintosh and on the windows machine? I purposefully set the intensity very low by default to lower the risk to people's hardware. Edit the intensity here:
{ "index" : 0, "intensity" : 64, "worksize" : 8, "affine_to_cpu" : false },
to a multiple of 8, so you could try 128, 256, 512, 1024 and see how it goes for you.
Device 0 work size 8 / 1024
I think on minerpool it was fast , right here on nanopool my device does not show up as a miner , although i am getting results accepted message. I think on windows i am using tsv miner and its configured for nanopool and it shows up fine on nanopool monitor but this one just submits results , will keep it on for a whole night to see the difference