What does this log mean?

pimmim · March 2015

Hi,

I recently started mining again, and eventhough previously I had no issues whatsoever I now keep getting this log:

20s:79.09 avg:78.75 u:67.27 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.88 avg:78.75 u:66.91 Mh/s | A:0 R:0+0(none) HW:0/none

20s:79.09 avg:78.76 u:66.56 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.89 avg:78.75 u:66.21 Mh/s | A:0 R:0+0(none) HW:0/none

20s:79.08 avg:78.76 u:65.87 Mh/s | A:0 R:0+0(none) HW:0/none

20s:79.24 avg:78.76 u:65.52 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.99 avg:78.76 u:66.29 Mh/s | A:0 R:0+0(none) HW:0/none

[2015-03-10 23:04:01] Stratum connection to pool 0 interrupted

20s:75.60 avg:78.72 u:65.95 Mh/s | A:0 R:0+0(none) HW:0/none

[2015-03-10 23:04:05] Stratum authorisation success for pool 0

20s:74.67 avg:78.69 u:66.71 Mh/s | A:0 R:0+0(none) HW:0/none

20s:75.84 avg:78.68 u:67.46 Mh/s | A:0 R:0+0(none) HW:0/none

20s:76.80 avg:78.68 u:67.12 Mh/s | A:0 R:0+0(none) HW:0/none

20s:77.50 avg:78.68 u:66.78 Mh/s | A:0 R:0+0(none) HW:0/none

20s:77.95 avg:78.68 u:68.59 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.14 avg:78.68 u:69.31 Mh/s | A:0 R:0+0(none) HW:0/none

[2015-03-10 23:06:22] New block: ...74f1df2c3a6b7d86 diff 47.4G (339.5P)

[2015-03-10 23:06:22] Stratum from pool 0 detected new block

20s:78.45 avg:78.68 u:68.97 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.53 avg:78.68 u:68.63 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.43 avg:78.68 u:68.30 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.57 avg:78.68 u:67.96 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.48 avg:78.68 u:69.71 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.62 avg:78.68 u:69.38 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.41 avg:78.68 u:69.04 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.55 avg:78.68 u:68.71 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.50 avg:78.68 u:69.41 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.48 avg:78.67 u:71.11 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.69 avg:78.68 u:70.78 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.49 avg:78.67 u:70.44 Mh/s | A:0 R:0+0(none) HW:0/none

20s:78.59 avg:78.67 u:71.12 Mh/s | A:0 R:0+0(none) HW:0/none

Could someone please help me fix this issue?

FabulousPanda · March 2015

What pool are you connected to? Looks like it's connecting ok but not getting any work, possibly your pool can't give you low enough difficulty shares for GPU mining.

pimmim · March 2015

the standard set pool : http://stratum.mining.eligius.st:3334

FabulousPanda · March 2015

You used your BTC address for both rewards and passwords right? How long did you let it mine?

How often are you getting this line

[2015-03-10 23:04:01] Stratum connection to pool 0 interrupted

and do you get any like this

[2015-03-11 01:53:31] New best share: 65

I only have a 7GH/s BFL Jalapeño and a 2GH/s antminer to test with (not usually turned on), the Jalapeño seems to take 2-3 minutes between accepted shares and the antminer had one accepted after 10 minutes. Extrapolating from that it would probably take over 4 hours between shares with your GPU at that speed. Also, the minimum payout is way too high for you to ever see anything unless you have something more powerful pointed at the same address on eligius

you could give this pool a shot though:

http://fabulouspanda.triplemining.com

or look around for whichever has the lowest payout threshold

pimmim · March 2015

Thanks! Will try that out for now. I'll post here if I find anything else.

pimmim · March 2015

hmm this gives me the follow error:

[2015-03-11 03:28:48] /Applications/MacMiner.app/Contents/Resources/bfgminer/bin/bfgminer: -c: JSON decode of file '/Users/Pim/Library/Application Support/MacMiner/bfgurls.conf' failed

unexpected newline

FabulousPanda · March 2015

something went wrong writing the pools to the file it's talking about - maybe a weird character in the URL? - pool itself should be entered like so:

stratum.triplemining.com:3334

pimmim · March 2015

Thanks some how it had triple copied it eventhough it showed blank!

Howdy, Stranger!

Quick Links

Categories

What does this log mean?

Comments

Leave a Comment