Trouble with FPGA/ASIC and Antminer U2

jimjpublic

I'm not getting any rate. Shows 0.0 Hh. I'm using Elegius pool. 

[2015-01-10 22:07:42] API running in IP access mode on port 4028

20s:  0.0 avg:  0.0 u:  0.0  h/s | A:0 R:0+0(none) HW:0/none

20s:  0.0 avg:  0.0 u:  0.0  h/s | A:0 R:0+0(none) HW:0/none

Do I need to add CFGMiner in addition to my MacMiner down load or does it come with it?

FabulousPanda

MacMiner uses BFGMiner, CGMiner and a few CPU miners - if you use the ASIC device window, open the prefs panel with the cog button and select the checkbox for antminer - restart and hopefully you're good to go!