Issues with Detecting Rockminer R-Box

rubenh

Hello,

MacMiner is only capable of detecting one of two of my R-Boxs, even though my macbook is cable of detecting both with the ls -l /dev/cu.* command:

crw-rw-rw-  1 root  wheel   17,   1 Dec 18 17:50 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw-  1 root  wheel   17,   3 Dec 18 17:50 /dev/cu.Bluetooth-Modem
crw-rw-rw-  1 root  wheel   17,  75 Dec 18 20:30 /dev/cu.SLAB_USBtoUART
crw-rw-rw-  1 root  wheel   17,  73 Dec 18 20:30 /dev/cu.SLAB_USBtoUART36

I've tried swapping usb cables, ports, and power supplies with no luck.  The light on the mining R-Box repeatedly flashes in blue, where as the light on the non-mining R-Box stays lit blue.

Here's the mining log:

[2014-12-18 20:36:51] Started bfgminer 4.10.0-unknown
[2014-12-18 20:36:51] Started bfgminer 4.10.0-unknown
[2014-12-18 20:36:51] Loaded configuration file /Users/rh/Library/Application Support/MacMiner/bfgurls.conf
[2014-12-18 20:36:51] Loaded configuration file /Users/rh/Library/Application Support/MacMiner/bfgurls.conf
[2014-12-18 20:36:55] Probing for an alive pool
[2014-12-18 20:36:55] Probing for an alive pool
[2014-12-18 20:36:55] Testing pool stratum+tcp://uk1.ghash.io:3333
[2014-12-18 20:36:55] HTTP request failed: Protocol stratum+tcp not supported or disabled in libcurl
[2014-12-18 20:36:56] Stratum authorisation success for pool 0
[2014-12-18 20:36:56] Stratum connection to pool 0 resumed
[2014-12-18 20:36:56] Pool 0 stratum+tcp://uk1.ghash.io:3333 alive
[2014-12-18 20:36:56] Pool 0 stratum+tcp://uk1.ghash.io:3333 alive
[2014-12-18 20:36:56] Pool 0 stratum+tcp://uk1.ghash.io:3333 alive
[2014-12-18 20:36:56] Network difficulty changed to 39.5G (282.5P)
[2014-12-18 20:36:56] Network difficulty changed to 39.5G (282.5P)
[2014-12-18 20:36:56] New block: ...a6781630 #334910 diff 39.5G (282.5P)
[2014-12-18 20:36:56] Stratum from pool 0 detected new block
[2014-12-18 20:36:56] Stratum from pool 0 detected new block
[2014-12-18 20:36:56] API running in IP access mode on port 4028
[2014-12-18 20:36:56] API running in IP access mode on port 4028
[2014-12-18 20:36:56] New best share: 1
[2014-12-18 20:36:56] New best share: 17

Thoughts?

FabulousPanda

Is it always the same R-Box which fails to detect, e.g. even if you connect them one at a time that one fails to function as the only connected miner?