overclock antminer and klondike miner in cgminer

Anthony Cruz1

hello what would i enter to over clock ant miner u1 and klondike k16 please

Anthony Cruz1

also bfgminer says [2014-02-09 18:03:12] No devices detected!
[2014-02-09 18:03:12] Waiting for devices i have proper drivers installed

Anthony Cruz1

 [2014-02-09 19:28:35] Started bfgminer 3.10.0

 [2014-02-09 19:28:35] Loaded configuration file /Users/DarkKnight/Library/Application Support/MacMiner/bfgurls.conf

 [2014-02-09 19:28:35] No devices detected!

 [2014-02-09 19:28:35] Waiting for devices

 [2014-02-09 19:28:35] Probing for an alive pool

 [2014-02-09 19:28:35] Testing pool stratum+tcp://mint.bitminter.com:3333

 [2014-02-09 19:28:35] HTTP request failed: Protocol stratum+tcp not supported or disabled in libcurl

FabulousPanda

It doesn't look like it's picking anything up,  are you mining with cgminer or bfgminer?

Anthony Cruz1

Bfgminer

FabulousPanda

You should check the Activity Monitor app to make sure there are no extra bfgminer or cgminer processes running, if there are quit them, also if you put 

ls -l /dev/cu.*

in Terminal your devices should show up there if the computer sees them, antminer should look something like this

/dev/cu.SLAB_USBtoUART

To over clock the antminer you put

--set-device antminer:clock=x0781

In manual flags, swap that 7 in 0781 for 8, 9 or A like x0A81 or x0981 with A being fastest

for klondike in manual flags

--klondike-options 1300:70

where 1300 is clock and 70 is target temperature so higher on both is faster 

Anthony Cruz1

--set-device antminer:clock=x0781 --klondike-options 1300:70

so like this in the flag field?? (with a space between 1 and-)

Also thank you.

FabulousPanda

You've got it, copy/paste that first line of your post and it should work fine - although x0781 is the default ant clock so it shouldn't change anything

They showing up OK now?