are you running at the command line or the BFG window? either way it's not set up automatically - at the command line or in manual flags in BFG Miner miner settings panel add
--api-listen --api-allow R:0/0
then add click 'add networked miner' in API Output and add 4028 if it's running on the same machine or IP:4028 if not
or use the FPGA/ASIC window which hooks up automatically!
Comments
My computer ip is 10.0.1.6.
The ip in add network printer is 192.168.1.99:4028.
Thanks ... Ken
-I 11 -w 64 --api-listen --api-allow R:0/0
Quit and restarted bfgniner.
Thanks...
The ip in add network miner defaults to: 192.168.1.99:4028.
So I'll try:
192.168.1.99:4029
And if that doesn't work:
10.0.1.6:4029
When I add the network miner.
Thanks again!!!