tatialdi
Comments
-
ZEUS BLIZZARD-X6 3,6 ??????please run it or is the problem?
-
Hey how it goes nake new messages?
work goes well -
x6 not see
-
[2014-08-09 15:33:54] Started bfgminer 4.6.0-unknown
[2014-08-09 15:33:54] Loaded configuration file /Users/tatialdi/Library/Application Support/MacMiner/ltcurls.conf
[2014-08-09 15:33:54] Loaded configuration file /Users/tatialdi/… -
still the same terminal device see macminer not see
-
When can I start your ZEUS BLIZZARD-X6 3.6 ??
You have new messages -
I will wait for new reports with
-
I tried just kept two devices
The problem is that I can not let a single new ZEUS BLIZZARD-X6 3.6
simply will not run on macminer -
[2014-08-07 23:29:27] gc3355: Failed reading work from 12
[2014-08-07 23:29:27] gridseed: Invalid detect response from /dev/cu.SLAB_USBtoUART -
I can not even run itself zeusx6 !!! please advice
-
crw-rw-rw- 1 root wheel 19, 5 28 čvc 15:06 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel 19, 7 28 čvc 15:06 /dev/cu.Bluetooth-Modem
crw-rw-rw- 1 root wheel 19, 127 7 srp 22:41 /dev/cu.SLAB_USBtoUART
crw-rw-r… -
Hey last time you helped me very quickly and well thank you very much
Today I have another problem!
I bought ZEUS BLIZZARD-X6 3.6 + MH / S 110W 1.5 KG
I have two ZEUS BLIZZARD 1.3 1.4MH and one ZEUS BLIZZARD-X6 3.6
The new one I … -
FabulousPanda
Thank you very much for your help, I can only recommend fast service and counseling
Thank you very… -
Give screenshot you prefer to see the others how it should be set Thank you
-
[2014-07-04 19:48:57] antminer: Test failed at /dev/cu.SLAB_USBtoUART: get c463d507, should: 000187a2
[2014-07-04 19:48:57] BFL: Attempting to open /dev/cu.SLAB_USBtoUART
[2014-07-04 19:48:57] BFL: Attempting to open /dev/cu.SLAB_… -
I do not know how to send a screenshot!!
-
Could someone run or look through the team viewer??
-
No devices detected!
-
Zeus miner still nothing you can not find someone makes a mistake and do not know where??
-
where I find I'm a newbie
-
No devices detected!
-
Still nothing as well
-
Still nothing about it fails to run
crw-rw-rw- 1 root wheel 19, 9 4 čvc 13:54 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel 19, 11 4 čvc 13:54 /dev/cu.Bluetooth-Modem
crw-r… -
/ FPGA / ASIC is a blank window showed nothing
I entered everything as you said and still nothing
Thanks for your time I hope to manage to start today
-
FPGAs do not write anything at all
cgminer wrotePool settings not understandMacMiner/bfgurls.conf' failed
unable to open /Users/tatialdi/Library/Application Support/MacMiner/bfgurls.conf: No such file or directory
tatialdis-MacBook-Air:~ tatialdi$ ls -l /dev/cu.*
crw-rw-rw- 1 root wheel 19, 9 3 čvc 15:46 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel 19, 11 3 čvc 15:46 /dev/cu.Bluetooth-Modem
crw-rw-rw- 1 root wheel 19…Where can I find a window panel ASIC miner?
I apologize but I am a beginner must detail
thanks
I could not find where to write!
you can be more specific
thanks