pon
Comments
-
as far as the error msg because of the macos security you can also do it with the terminal as described in the instructions.
(Quote) -
ok, now i got v1.04. works. but only if put in the application folder. i had the older versions always on desktop. but with the new one it always search for the libs in the applications folder, if its not ther you get:
Library not loaded: /… -
no problem wirth delays ;-) some things need time ;-)
is this still v1.02? atl east it says so when starting. i took the first in the list: http://downloads.f… -
graphic cards are pretty useless with the new algo. slow the computer to a snail and give very low hashrates. same for me. so --noAMD is the way to go ;-)
-
as for the memory or whatever slowdown, the msg i get is:
[2019-12-23 17:59:31] : MEMORY ALLOC FAILED: mmap failed, check attribute 'use_slow_memory' in 'config.txt'after this msg on startup of the miner the hashrate is very low. a…
-
i don't remember the exact warning msg. something about large memory page disabled or similar. i only got it after starting or restarting xmr-stak after using the mac for longer time and then got very low hashrates. after a restart the msg went a…
-
gpu is resting in my imac :-)
regarding speed increase: the biggest brake is the memory warning on start. in fact, this makes a difference from ~2300h/s to ~3200h/s withourt warning with ident settings file on my imac. so i don't use the --… -
thank you for the new version. speed seems up a bit but it's hard to say, i think ~5% perhaps. amd speed is still useless, so i have disabled it completely.
as for the instructions i think you have to xattr all the .dylib (libssl, libcrypt… -
you're right, works with catalina. thats the problem when you don't read instructions to the end ;-)
i had also to xattr the libxmrstak_opencl_backend.dylib but then it worked. -
this is what i did.
on catalina, i couldn't get it to run because of the new security crap. with gatekeeper disabled i can start xmr-stak-rx but loading the dylib says it's damaged. with gatekeeper enabler even xmr-stak-rx fails to run.tried it. no success:
[2019-11-29 19:35:10] : Device 0 work size 16 / 32.
[2019-11-29 19:35:10] : OpenCL device 0 - Precompiled code /Users/home/.openclcache/5305de63c8ca2af1b1de694fe042b0716c85586d4f2823fefef89ac4670fe70f.openclbin n…i didn't try any tweaking, just took the autoconfig prefs to see if there are any errors.
now i checked the amd.txt config file. asm is set to false, so no specifc assembler code (which should be available for the radeon 580x), when i set i…runs also on an imac 2019 with amd so it seems dependencies are or; amd hash seems very low with autoconfig, ~70h/s
tested it on a macmini 2012, ~700h/s; started without lib errors. next step will be a test on a amd equipped mac.
tried different interleave settings between 35 and 50. no change to the interleave 45 printing. but i think this is only consmetic.
now it works. thanks a lot. strange enough on the imac with 10.13 there is no homebrew installed.
what are thes opencl interleave msgs? never seen them before.
autoconfig for amd seems to be a lot better on the new version, 2 thre…
(Quote)sorry, 10.13.1 to 10.13.6 ;-)
but then it worked.on a mac pro with 10.14.3 i get the msg
WARNING: AMD cannot load backend library: dlopen(libxmrstak_opencl_backend.dylib, 1): Library not loaded: /usr/local/opt/o…thnx for your steady work. works good for me on different macs. for some i had to update from 10.12.1 to 10.12.4 (without update you get error 4 when compiling for opencl starts). on the non gpu macs you get a opencl error on start but it's only …
(Quote)thank you for the hint. i reinstalled the 10.13.6 combo update and now teh illegal instruction is gone and the amd version runs
i don't think this is an error, only a notification which is triggered by the auto setting. goes away with changing the cpu settings as mentioned by fabulouspanda
thx, the new b-version works again on the imac 27. on the mac pro same problem as with 2.4.3. starts to compile the open cl bin and stopps with error, illegal instruction: 4
thx for your work. already tried. cpu version works fine, amd version works also but without amd ;-)
this means only cpu, no amd (tried on an imac 27 and on a mac pro)thx
that's expected behavior ;-) if you don't like the lag take the cpu version.
amd fire pro d300
new version work again, cpu only on all machine i tried. amd only on the imac. on the mac pro the same msg as on the imac on first run (openclbin not found, compiling). but the "illegal instruction 4" and it stops. on the imac it compiles and the…
i also run it on an imac without problems. same system config.
with 2.4.3 there is another problem (different thread)did someone managed to run the 2.4.1 amd version on a mac pro with 10.13?
on a Mac Pro with 10.13.1 I get a compiling error:
[2018-04-09 13:06:47] : Mining coin: monero7
[2018-04-09 13:06:47] : Compiling code and initializing GPUs. This will take a while...
[2018-04-09 13:06:47] : WARNING: using non …