conmango
Comments
-
pigpenI think we are waiting for an update to MacMiner. I had the same results at you.
-
I noticed a few things as well with MacMiner. Even though I tell it to open CPU Miner automatically. It seems to open up GPU Miner for some reason. As mentioned above manual flags don't seem to stick. I seem to get good results with --freq=850 -G /d…
-
I would be happy to help you troubleshoot the 1 chip. So just let me know when its updated and ill report back.
-
This was so much easier with the 5 chip.
-
I plugged in the 5chip. Just added --freq=800 -G /dev/cu.usbmodemfa141 into CPU Miner Manual flag. and it worked. Only 13 of 17 accepted so far, but maybe that will stabilize in a little bit.
-
Funny thing. I just got a 5 chip in the mail to test out. So I was going to try that out while I wait for my Pi to arrive.
-
It seems to give me the same result. I checked the pool site and it doesn't report anything happening.
-
I think I may just get a rasp pi. Seems as though it might be easier to manage that way then on a mac.
-
[2014-03-13 10:34:24] Starting Stratum on stratum+tcp://mining.usa.hypernova.pw:3333
[2014-03-13 10:34:24] 0: GC3355 chip mining thread started, in SINGLE mode
[2014-03-13 10:34:24] 0: Open UART device /dev/cu.usbserial-000014FAA
The results should look like this in the terminal right?crw-rw-rw- 1 root wheel 18, 13 Mar 12 01:30 /dev/cu.usbserial-000014FAA
crw-rw-rw- 1 root wheel 18, 15 Mar 12 01:30 /dev/cu.usbserial-000014FAB
<…
Same results. Only the GPU from my laptop shows up in GPU Miner and in ASIC Miner it says No Devices Detected.Yes I changed it to -S gridseed:allIll try the other option and report back.And here is the output from ASIC Miner:[2014-03-12 01:16:41] Started bfgminer 3.9.0
[2014-03-12 01:16:41] Loaded configuration file /Users/macbookproLibrary/Application Support/MacMiner/bfgurls.conf
[2014-03…
Still seems the same. It only lists the my video card in the laptop.[2014-03-12 01:15:17] Stratum from pool 0 detected new block
[2014-03-12 01:15:17] Pool 0 is hiding block contents from us
[2014-03-12 01:15…
Thanks for taking the time to respond.When I use GPU Miner I get this result:When using GPU Window I get this result:
[2014-03-12 00:53:45] Started bfgminer 3.9.0
[2014-03-12 00:53:45] Loaded configuration file /Users/macpro/Library/App…
I installed the drivers already. And also ran the ktextunload.ls -l /dev/cu.*
crw-rw-rw- 1 root wheel 18, 1 Mar 10 08:53 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw- 1 root wheel 18, 3 Mar 10 08:53 /…
Here is some updated stuff if it helps: Trying this in CPU Miner now.[2014-03-11 18:37:38] Starting Stratum on stratum+tcp://mining.usa.hypernova.pw:3333
[2014-03-11 18:37:38] 0: GC3355 chip mining thread started, in …