FabulousPanda
Comments
-
your rock miner isn't showing up there. we can't get it working without that - first power off, unplug usb, plug in again and run the terminal command again. if that doesn't work, try reinstalling the silabs driver and give it another shot.
-
Oh and did you add the manual flags-S rockminer:all?
-
As far as I know Asteroid only disables the drivers while it's running so you should be fine!in Terminal runls -l /dev/cu*and the device will show up there. I think it's r…Oh, and i read that some of these miners have buggy firmware which can sometimes cause it to be picked up (possibly the issue you had?) - it recommended this:--set zus:ignore_golden_nonce=1That's really peculiar, must be an artefact of Scrypt mining as it doesn't happen on the sha256 end - unfortunately I don't have a scrypt miner to test the theory with.-G used to be 'disable GPU' but I'm pretty sure that was r…Asteroid messes with the Mac OS drivers so it could be a conflict, try without that open or after restarting the machine - the problem I was linking to seems to be that a lot of the time it doesn't work, but if you keep trying sometimes it will star…haha sure if you want, email john at fabulous panda dot co dot ukscreenshot your GPU Miner window preferences panel pleaseoh man i totally forgot you're scrypt mining, use the GPU miner window and set it to scrypt! :Sor-S noauto -S zus:allThat might helpTry-S zus:allit's definitely working for other people - unfortunately i don't have a device to testQuote from ck, dev of cg:With the official cgminer, use only --anu-freq and nothing else.Obviously, he intends you to use a number too, e.g. --anu-freq 225I wo…This issue it turns out is extensively discussed hereUnfortunately the …You have the silabs driver installed righ? What changed between the first one and the second one?I wonder whether this is the problem you're having - might explain the low accept rate from bfg:
By default, Antminer U1 devices run at a clockspeed of 200. This comman…
I would have thought cg would support it, but the ASIC.README only saysTry adding-S rockminer:allTo the manual flags section of the FPGA/ASIC Miner preferences panelIt should work right now…Try adding-S rockminer:allTo the manual flags section of the FPGA/ASIC Miner preferences panelwhen you run ls -l /dev/cu* does it show up there? Got the silabs driver installed?might try adding --hotplug 30 to the manual flagsI'm using one fine with bfg - was yours working fine with it until now?Try these flags:-d zus -S zus:/dev/cu.SLAB_USBtoUART --force-dev-initas posted by Paulin FPGA/ASIC window don't bother cgminer window it doesn't support zeusminerDid you put-S zus:/dev/cu.SLAB_USBtoUARTin manual flags?You don't have a mining pool account to use?Set up a pool in preferencesFirst set up a pool in Preferences and use the FPGA/ASIC window NOT the cgminer windowMacMiner - View menu - FPGA/ASIC Device window - click the little cog/sprocket button - there's a bit that says manual flagsIs it represented properly by the pool? I wonder whether even 2Gh/s is getting slow these days…put this in the ASIC Miner window preferences panel, manual flags:-S zus:/dev/cu.SLAB_USBtoUARTThen start the miner and you should be all set up!Have you tried using bfgminer instead? In that you use--set-device antminer:clock=0981default is 0781 and in between 0881